BetaFPV Meteor65 Pro II Cases

Every case we print for the BetaFPV Meteor65 Pro II, made to order in the colors you pick.

Got a different drone? See every drone we make cases for.

Open 3D printed drone case holding a tiny whoop, a Vifly Whoopstor V3 charger and batteries
Open case with a tiny whoop on the two-piece hatch and a USB cable looped around it
Battery side of the case with batteries held in the red clips
Four tiny whoops on their hatches around a Whoopstor V3 case, with a Hexacharger base and a storage base
Storage base with the red dividers in place and one divider beside it
Closed drone case standing upright, showing the latch and the charger power port
Closed drone case from the other side, showing the charger fan opening
Open 3D printed drone case holding a tiny whoop, a Vifly Whoopstor V3 charger and batteries
Open case with a tiny whoop on the two-piece hatch and a USB cable looped around it
Battery side of the case with batteries held in the red clips
Four tiny whoops on their hatches around a Whoopstor V3 case, with a Hexacharger base and a storage base
Storage base with the red dividers in place and one divider beside it
Closed drone case standing upright, showing the latch and the charger power port
Closed drone case from the other side, showing the charger fan opening

Meteor65 Pro II Drone Case (Elite w/ Charger Bay)

$39.99
/
Shipping calculated at checkout.
Case Color
Accent Color
Charger Bay
  • In stock, ready to ship
  • Backordered, shipping soon

Built around the Meteor65 Pro II. Flying the original Meteor65 Pro? Get that case here.

Heads up: the charger isn't included. This case has a bay built to hold the charger you already own, so it rides along with your drone and batteries. No charger? Pick the storage version instead.

Product Description

This fully 3D-printed hard case carries your entire whoop setup in one box. Your charger sits in the middle (the bay is printed for the Vifly Whoopstor V3, the BetaFPV Hexacharger or the ISDT E625), your BetaFPV Meteor65 Pro II rides in a fitted bay on one side, and up to twelve batteries clip into the tray on the other. Close the lid and your whole session is in one hand.

The hatch under your drone comes in two pieces, so it fits small whoops better. Your cable, spare props, and small tools tuck in underneath it.

At the field, open it flat and the charger is already sitting in its bay, so you never have to unpack it. Plug in a USB-C power bank or a lipo and charge your packs right there in the case, while the rest stay clipped in the tray ready to fly.

A piece of filament is used within the hinge, eliminating the need for extra hardware, keeping the build simple, durable, and easy to repair. The battery clips slide into place with a friction fit, and the latch presses in from the top.

A tip on the battery clips. They slide in and out on purpose, so you can arrange them around whatever packs you fly. That also means they can sit a little loose at first. Once you land on a layout you like, one drop of super glue per clip locks it in for good. Just wait until you have settled on your configuration before you glue.

Pick your bay. The middle of the case is printed to fit the charger you actually own, so tell us which one that is. Use the Charger Bay menu above:

  • Whoopstor V3 - for the Vifly Whoopstor V3
  • Hexacharger - for the BetaFPV Hexacharger
  • ISDT E625 - for the ISDT E625
  • No Charger (Storage) - no charger to carry? The middle becomes an open storage bin, and the dividers are included

The price is the same whichever you pick. Battery clips come fitted for BetaFPV Lava 1S 450-550mAh and Lava II 1S 480-680mAh packs. Flying the smaller packs instead? Ask us and we will fit that clip set for you.

What It Holds

  • Your Vifly Whoopstor V3, BetaFPV Hexacharger or ISDT E625, or extra gear in the storage version
  • Your Meteor65 Pro II, props on
  • Up to twelve 1S batteries
  • USB-C cable, spare props, and small tools

Compatibility

  • Fits the Meteor65 Pro II.
  • Ships with clips sized for BetaFPV Lava 1S 450-550mAh and Lava II 1S 480-680mAh packs. The smaller BetaFPV Lava 1S 260-300mAh and Lava II 1S 280-320mAh packs need a different clip set, so just ask and we will fit it. Other 1S batteries may not clip in properly.
  • The charger bay is printed for the Vifly Whoopstor V3, the BetaFPV Hexacharger or the ISDT E625. Pick the one you own from the Charger Bay menu, or pick No Charger (Storage) for the extra room. Whoopstor V1 and V2 have a different footprint and do not fit.
  • The charger, drone, and batteries are not included. This is the case only.

Flying Something Else?

We print cases for a whole lineup of tiny whoops. Pick your drone and see every case that fits it.

Open 3D printed drone case in dark gray with blue battery clips, shown beside a BetaFPV whoop and four Lava battery packs
Top-down view of the open case, blue battery clips in one half and the printed hinge across the middle
The open case at an angle, showing the blue battery clips and the empty second half
The closed case from the front, showing the tab on the side seam
The closed case from the hinge side, showing the printed hinge and the filament pin through it
Open 3D printed drone case in dark gray with blue battery clips, shown beside a BetaFPV whoop and four Lava battery packs
Top-down view of the open case, blue battery clips in one half and the printed hinge across the middle
The open case at an angle, showing the blue battery clips and the empty second half
The closed case from the front, showing the tab on the side seam
The closed case from the hinge side, showing the printed hinge and the filament pin through it

Meteor65 Pro II Drone Case (Classic)

$29.99
/
Shipping calculated at checkout.
Case Color
Accent Color
  • In stock, ready to ship
  • Backordered, shipping soon

This is the Meteor65 Pro II version. Flying the first-generation Meteor65 Pro? Get the Meteor65 Pro Classic case instead, it is built around the smaller packs.

Product Description

This fully 3D printed hard case carries your BetaFPV Meteor65 Pro II and its battery packs in one box, printed to order in the colors you pick. It is a hinged clamshell: your whoop travels on one side, up to eight packs clip in on the other, and it closes into a compact grab-and-go shape.

A piece of filament is used within the hinge, eliminating the need for extra hardware, keeping the build simple, durable, and easy to repair.

A tip on the battery clips. They slide in and out on purpose, so you can arrange them around whatever packs you fly. That also means they can sit a little loose at first. Once you land on a layout you like, one drop of super glue per clip locks it in for good. Just wait until you have settled on your configuration before you glue.

Compatibility

  • Fits the BetaFPV Meteor65 Pro II.
  • Does not fit the Meteor75 Pro, Meteor75 Pro II, Air65, Air65 II, Air75, or Air75 II. Each of those has its own case.
  • Battery clips are sized for BetaFPV Lava 450-550mAh and Lava II 480-680mAh packs. The smaller 260-300mAh and 280-320mAh packs are what the first-generation case is built around.
  • The drone, batteries, and charger are not included. This is the case only.

Flying Something Else?

We print cases for a whole lineup of tiny whoops. Pick your drone and see every case that fits it.