BetaFPV Meteor75 Pro Cases

Every case we print for the BetaFPV Meteor75 Pro, made to order in the colors you pick.

Got a different drone? See every drone we make cases for.

Open 3D printed drone case holding a tiny whoop, a Vifly Whoopstor V3 charger and batteries
Close-up of a tiny whoop sitting on the red two-piece hatch inside the case
One half of the hatch lifted to show spare props stored underneath
Hatch lifted to show a USB cable and small parts stored underneath
Battery side of the case with batteries held in the red clips
Empty case with the two-piece red hatch closed
Case with a tiny whoop next to the storage base with its dividers
Storage base with the red dividers in place and one divider beside it
Charger case beside a Hexacharger base and a storage base with dividers
Four tiny whoops on their hatches around a Whoopstor V3 case, with a Hexacharger base and a storage base
Closed drone case standing upright, showing the latch and the charger power port
Closed drone case from the other side, showing the charger fan opening
Josh assembling the case: hinges, battery clips and the two-piece hatch going in
Open 3D printed drone case holding a tiny whoop, a Vifly Whoopstor V3 charger and batteries
Close-up of a tiny whoop sitting on the red two-piece hatch inside the case
One half of the hatch lifted to show spare props stored underneath
Hatch lifted to show a USB cable and small parts stored underneath
Battery side of the case with batteries held in the red clips
Empty case with the two-piece red hatch closed
Case with a tiny whoop next to the storage base with its dividers
Storage base with the red dividers in place and one divider beside it
Charger case beside a Hexacharger base and a storage base with dividers
Four tiny whoops on their hatches around a Whoopstor V3 case, with a Hexacharger base and a storage base
Closed drone case standing upright, showing the latch and the charger power port
Closed drone case from the other side, showing the charger fan opening
Josh assembling the case: hinges, battery clips and the two-piece hatch going in

Meteor75 Pro Drone Case (Elite w/ Charger Bay)

$39.99
/
Shipping calculated at checkout.
Case Color
Accent Color
Charger Bay
  • In stock, ready to ship
  • Backordered, shipping soon

Does NOT fit the original Meteor75 or the Air75. Flying one of those? Get the Meteor75 Classic case or the Air75 Classic case.

Heads up: the charger isn't included. This case has a bay built to hold the charger you already own, so it rides along with your drone and batteries. No charger? Pick the storage version instead.

Product Description

This fully 3D-printed hard case carries your entire whoop setup in one box. Your charger sits in the middle (the bay is printed for the Vifly Whoopstor V3, the BetaFPV Hexacharger or the ISDT E625), your BetaFPV Meteor75 Pro rides in a fitted bay on one side, and up to twelve batteries clip into the tray on the other. Close the lid and your whole session is in one hand.

The hatch under your drone comes in two pieces, so it fits small whoops better. Your cable, spare props, and small tools tuck in underneath it.

At the field, open it flat and the charger is already sitting in its bay, so you never have to unpack it. Plug in a USB-C power bank or a lipo and charge your packs right there in the case, while the rest stay clipped in the tray ready to fly.

A piece of filament is used within the hinge, eliminating the need for extra hardware, keeping the build simple, durable, and easy to repair. The battery clips slide into place with a friction fit, and the latch presses in from the top.

A tip on the battery clips. They slide in and out on purpose, so you can arrange them around whatever packs you fly. That also means they can sit a little loose at first. Once you land on a layout you like, one drop of super glue per clip locks it in for good. Just wait until you have settled on your configuration before you glue.

Pick your bay. The middle of the case is printed to fit the charger you actually own, so tell us which one that is. Use the Charger Bay menu above:

  • Whoopstor V3 - for the Vifly Whoopstor V3
  • Hexacharger - for the BetaFPV Hexacharger
  • ISDT E625 - for the ISDT E625
  • No Charger (Storage) - no charger to carry? The middle becomes an open storage bin, and the dividers are included

The price is the same whichever you pick. Battery clips come fitted for BetaFPV Lava 1S 450-550mAh and Lava II 1S 480-680mAh packs. Flying the smaller packs instead? Ask us and we will fit that clip set for you.

What It Holds

  • Your Vifly Whoopstor V3, BetaFPV Hexacharger or ISDT E625, or extra gear in the storage version
  • Your Meteor75 Pro, props on
  • Up to twelve 1S batteries
  • USB-C cable, spare props, and small tools

Compatibility

  • Fits the Meteor75 Pro.
  • Ships with clips sized for BetaFPV Lava 1S 450-550mAh and Lava II 1S 480-680mAh packs. The smaller BetaFPV Lava 1S 260-300mAh and Lava II 1S 280-320mAh packs need a different clip set, so just ask and we will fit it. Other 1S batteries may not clip in properly.
  • The charger bay is printed for the Vifly Whoopstor V3, the BetaFPV Hexacharger or the ISDT E625. Pick the one you own from the Charger Bay menu, or pick No Charger (Storage) for the extra room. Whoopstor V1 and V2 have a different footprint and do not fit.
  • The charger, drone, and batteries are not included. This is the case only.

Flying Something Else?

We print cases for a whole lineup of tiny whoops. Pick your drone and see every case that fits it.

BetaFPV Meteor 75 Pro case - 3D printed tiny whoop drone case in PETG
BetaFPV Meteor75 Pro drone case open, whoop and 1S batteries organized inside
Custom color 3D printed FPV drone case for the BetaFPV Meteor 75 Pro
BetaFPV Meteor75 Pro tiny whoop, batteries and accessories packed in the case
Closed 3D printed hinged carrying case for the BetaFPV Meteor 75 Pro
Meteor75 Pro Drone Case (Classic)
BetaFPV Meteor 75 Pro case - 3D printed tiny whoop drone case in PETG
BetaFPV Meteor75 Pro drone case open, whoop and 1S batteries organized inside
Custom color 3D printed FPV drone case for the BetaFPV Meteor 75 Pro
BetaFPV Meteor75 Pro tiny whoop, batteries and accessories packed in the case
Closed 3D printed hinged carrying case for the BetaFPV Meteor 75 Pro
Meteor75 Pro Drone Case (Classic)

Meteor75 Pro Drone Case (Classic)

$29.99
/
Shipping calculated at checkout.
Case Color
Accent Color
  • In stock, ready to ship
  • Backordered, shipping soon

Does NOT fit the Meteor75 Pro II or the original Meteor75. Flying one of those? Get the Meteor75 Pro II Classic case or the Meteor75 Classic case.

 

Product Description

This fully 3D-printed hard case is designed specifically for the BetaFPV Meteor75 Pro, keeping your drone and essentials secure in a compact, grab-and-go form factor. The hinged clamshell design protects your whoop while neatly organizing up to twelve 550mAh 1S batteries.

A piece of filament is used within the hinge, eliminating the need for extra hardware, keeping the build simple, durable, and easy to repair.

A tip on the battery clips. They slide in and out on purpose, so you can arrange them around whatever packs you fly. That also means they can sit a little loose at first. Once you land on a layout you like, one drop of super glue per clip locks it in for good. Just wait until you have settled on your configuration before you glue.

Printed in durable material and built for everyday use, whether you're heading to the field, packing a backpack, or storing your gear at home.

 

Compatibility

  • Fits Meteor75 Pro only
  • The drone, batteries, and charger are not included. This is the case only.

 

Flying Something Else?

We print cases for a whole lineup of tiny whoops. Pick your drone and see every case that fits it.