Does NOT fit the original Meteor75 or the Air75. Flying one of those? Get the Meteor75 Classic case or the Air75 Classic case.
Product Description
This fully 3D-printed hard case carries your entire whoop setup in one box. Your charger sits in the middle (the bay is printed for the Vifly Whoopstor V3, the BetaFPV Hexacharger or the ISDT E625), your BetaFPV Meteor75 Pro rides in a fitted bay on one side, and up to twelve batteries clip into the tray on the other. Cable, spare props, and small tools tuck in underneath. Close the lid and your whole session is in one hand.
At the field, open it flat and the charger is already sitting in its bay - you never have to unpack it. Plug in a USB-C power bank or a lipo and charge your packs right there in the case, while the rest stay clipped in the tray ready to fly.
A piece of filament is used within the hinge, eliminating the need for extra hardware, keeping the build simple, durable, and easy to repair. The battery clips slide into place with a friction fit, and the latch presses in from the top.
A tip on the battery clips. They slide in and out on purpose, so you can arrange them around whatever packs you fly. That also means they can sit a little loose at first. Once you land on a layout you like, one drop of super glue per clip locks it in for good. Just wait until you have settled on your configuration before you glue.
Pick your charger. The charger bay is printed to fit the charger you actually own, so tell us which one that is. Use the Charger menu above:
-
Whoopstor V3 - for the Vifly Whoopstor V3
-
Hexacharger - for the BetaFPV Hexacharger
-
ISDT E625 - for the ISDT E625
Your case ships with that bay built in, and the price is the same whichever you pick. Battery clips come fitted for BetaFPV Lava 1S 450-550mAh and Lava II 1S 480-680mAh packs. Flying the smaller 260-320mAh packs instead? Ask us and we will fit that clip set for you.
What It Holds
- Your Vifly Whoopstor V3, BetaFPV Hexacharger or ISDT E625
- Your Meteor75 Pro, props on
- Up to twelve 1S batteries
- USB-C cable, spare props, and small tools
Compatibility
- Fits the Meteor75 Pro in every flavor: Analog, Walksnail, HDZero, P1, and DJI O4.
- Ships with clips sized for BetaFPV Lava 1S 450-550mAh and Lava II 1S 480-680mAh packs. The smaller Lava 1S 260-300mAh and Lava II 1S 280-320mAh packs need a different clip set, so just ask and we will fit it. Other 1S batteries may not clip in properly.
- The charger bay is printed for the Vifly Whoopstor V3, the BetaFPV Hexacharger or the ISDT E625. Pick the one you own from the Charger menu. Whoopstor V1 and V2, the GepRC WooPower W63 and the ToolkitRC H1 have a different footprint and do not fit.
- The charger, drone, and batteries are not included. This is the case only.
Flying Something Else?
We print cases for a whole lineup of tiny whoops. Pick your drone and see every case that fits it.
