This case is for the 80mm M8 Freestyle. For the standard 85mm Mobula 8, pick the Mobula8 Drone Case (Elite).
Product Description
This fully 3D-printed hard case is made for the Happymodel M8 Freestyle HDZero, the 80mm whoop many shops sell as the Mobula8 Freestyle. It's our Mobula8 Elite case with the Freestyle shelf made for the 80mm frame, plus a stronger latch, an 8-segment hinge, and storage compartments in the bottom with hinged lids.
The battery clips are sized for packs about 13 x 17 mm, like GNB 530mAh 2S. Fit can vary by brand, and any packs that don't clip in still fit in the storage compartments underneath.
A piece of filament is used within the hinge, eliminating the need for extra hardware, keeping the build simple, durable, and easy to repair. The battery clips slide into place with a friction fit, and the latch presses in from the top.
A tip on the battery clips. They slide in and out on purpose, so you can arrange them around whatever packs you fly. That also means they can sit a little loose at first. Once you land on a layout you like, one drop of super glue per clip locks it in for good. Just wait until you have settled on your configuration before you glue.
Compatibility
- Fits the Happymodel M8 Freestyle HDZero (80mm), also sold as the Mobula8 Freestyle.
- For the standard 85mm Mobula 8, pick the Mobula8 Drone Case (Elite) instead.
- The drone, batteries, and charger are not included. This is the case only.
Flying Something Else?
We print cases for a whole lineup of tiny whoops. Pick your drone and see every case that fits it.
